See the list by country here.
描述
Length: 58mm /Weight: 5.8g
The body size is 63mm, slightly larger than the conventional HighCut, 5.8g, and the hooks used are #8 front and rear.
It can be used with both spinning tackle and bait finesse tackle, and the aim is to use the smallest size that won't cause stress with general bait finesse tackle.
Even with the same small plug, the Shad is extremely vulnerable to wind compared to the round crank, so after a comparative test with the same body, I chose to move the center of gravity, which has more benefits.
Even if the SR lip is short, it has a high angle, so if you use a fixed center of gravity, it will be taken away by the wind when it stalls in the second half of the cast.
In addition, in pursuit of good swim start and response, the rail for moving the center of gravity has been minimized and the honeycomb body has been made thinner.
The weight used is also a high-density tungsten ball instead of the common steel ball, reducing the diameter by approximately 25%.
By moving the weight to the tip of the thin tail, the flight posture is stabilized even in the wind, increasing flight distance.
The lip shape and low center of gravity increase the ability to restore the vehicle after it hits an obstacle and falls sideways.
The main battlefield is approximately 40-100cm deep, with a maximum depth of approximately 1.3m.