See the list by country here.
Description
Total length: 1.70m /Joint: 2 /Closed length: 121cm /Weight: 111g /Tip diameter: 2.6mm /Bottom diameter: 10.9mm /Weight load: #10-#80 / Carbon content: 89% /Accessories: Chloroprene rod belt, rod bag
A special rod for boat octopuses equipped with a sensitive metal top that can detect even the slightest touch of an octopus.The combination of the super-elastic titanium alloy tip ``Metal Top'' and the lightweight and highly sensitive ``AGS'' allows the octopus to come into contact with just one arm. Realizes a sharp tip that can express even the smallest signals. Furthermore, we pursue the optimal balance of light weight, sensitivity, operability, and ease of use. The "X45" structure suppresses invisible twisting of the blank and increases power and operability, providing comfortable thrusts, invitations, and wakes, as well as bat power that is unmatched by larger machines. ◆Advantages of fishing for octopuses with rods: The first advantage of using rods is that they are more sensitive and have less resistance. Also, the advantage of being able to cast at points where there are few hooks is very high, and when using eye sensitivity, you can feel the weight of the rod tip not returning, while when using hand sensitivity, you can experience the weight of a rice cake. After that, in the wake, the real thrill is the weight of bending the hard rod. Also, by taking advantage of the length of the rod, you can easily take in the boat without feeling the height of the edge of the boat. DAIWA TECHNOLOGY... ■AGS (Air Guide System), ■Metal Top, ■X45, ■Air Sensor Sheet (Standard Trigger) ◇Precautions for using the metal top◇ ■About temperature changes in the metal top. Due to the characteristics of the material, superelastic titanium alloy loses its elasticity in a low temperature environment of 5 degrees or less, causing the tip to return slowly. Extremely cold weather or wind in the early morning or at night may cause noticeable bending. Furthermore, in an environment of 0 degrees or less, the elasticity decreases more and more, and the tip of the tip remains bent and does not return. In either case, when the temperature rises, the material returns to its original superelasticity and can be used normally. ■Please avoid using it in a way that causes excessive bending. Metal tops are comfortable to use during normal operations, but excessive bending due to external factors such as winding up or thread tangles at the tip may leave curls (plastic deformation) or cause damage due to metal fatigue. there is. ■In the unlikely event of a problem, you can correct it by hand. If there are any kinks like in 2, you can correct them by slowly bending them in the opposite direction to the curved side. However, if you repeatedly correct the quirks, it may cause metal fatigue, so please avoid operations that will leave the quirks, such as getting caught. Please be sure to read the instruction manual for comfortable use.